Teledyne LeCroy USB Protocol Suite User Manual (Voyager_Advisor T3_Mercury) - Manual (Page 349)

USB Protocol Suite User Manual 349
Chapter 12
Traffic Generation 3.0 Exerciser
The USB 3.0 Exerciser allows you to generate USB 3.0 traffic and test designs under
realistic conditions. Traffic Generation can also transmit known bad packets, providing an
opportunity for engineers to observe how a device handles specific adverse conditions.
Note: For traffic generation for USB 2.0, see “Traffic Generation 2.0” on page 315 .
12.1 Connecting to Voyager M3/M3i
The connections differ for Host Emulation and Device Emulation.
Full Speed, Low Speed, Hi Speed, and SuperSpeed connections are the same.
You only need to plug into the Exerciser ports, because there is an internal Analyzer tap.
12.1.1 Host Emulation
For Host Emulation, connect a cable from Device under Test to Exerciser “A” port.
Figure 12.1: Connecting a Cable from Device under Test to Exerciser “A” Port.