Teledyne LeCroy USB Protocol Suite User Manual (Voyager_Advisor T3_Mercury) - Manual (Page 334)

Teledyne LeCroy Corporation Format of Traffic Generation Files
334 USB Protocol Suite User Manual
Endpoint
Configuration
begin_config
HERE Defines the beginning of the region in the file
used to configure the endpoint types.
The configuration is necessary to determine the
default behavior of the NAK retry mechanism
during IntelliFrame operation.
Between the begin_config=HERE and the
end_config=HERE statements is a series of
config_endpoint=xxx statements, which define
each endpoint's type and default retry behavior.
The config region must precede any actual
packet or bus condition statements.
For Device Emulation, the config region is
mandatory. It provides the mapping of the
endpoints into their corresponding segments of
Analyzer memory, which contain the traffic for
those endpoints.
When exporting to a .utg file from a trace file,
these sections are created automatically.
Syntax example: begin_config=HERE
Key Code Format Description