Teledyne LeCroy USB Protocol Suite User Manual (Voyager_Advisor T3_Mercury) - Manual (Page 367)

USB Protocol Suite User Manual 367
Graphical Scenario Editor Teledyne LeCroy Corporation
12.10.2 Initiator Setting
The Initiator Settings button displays the Initiator Settings dialog.
Figure 12.11: Initiator Setting Dialog
Device Information
The left pane shows Device Information, as expected from enumeration, so this pane
shows general device information from a pre‐configure file. The Device Information
DeviceInfo.cfg file is in the Generation directory under the users directory. You can edit
this file.
For each device, the following information is in the DeviceInfo.cfg file:
 Name
 Protocol (UASP or BOT)
 Address
 InterfaceNo
 AlternateSetting
 ConfigurationNo
 Endpoint Information
 EndpointNo
 Direction (IN or OUT)