Teledyne LeCroy USB Protocol Suite User Manual (Voyager_Advisor T3_Mercury) - Manual (Page 236)

Teledyne LeCroy Corporation Using the Navigator
236 USB Protocol Suite User Manual
9.9.1 Displaying the Navigator
Click in the toolbar, select Report > Navigator, or select the Navigation Bar checkbox
in the Display Options General window to display the Navigator window (see Figure 9.25
on page 236 ).
Figure 9.25: Navigator Window
The Navigator appears on the right side of the Main window. It has a two‐button toolbar
and a vertical slider bar. It also has colored panes for navigating the trace in different
ways. You set which panes are displayed through Navigator pop‐up menus.
The Navigator bar can be repositioned in the trace and can be oriented horizontally or
vertically, docked or undocked by dragging the parallel bars at the top or side of the
Navigator bar. By default, the Navigator bar appears vertically to the right of the trace
window.
The Navigator bar represents different types of trace information in the order of the
packets. The top of each bar corresponds to the first packet in the trace, and the bottom