IEI Integration RPC-6010G - Manual (Page 28)

RPC-6010G Rackmount LCD Workstation
4.1 Installation Considerations
4.1.1 Installation Precautions
When installing the RPC-6010G, please follow the precautions listed below:
Read the user manual: The user manual provides a complete description of
the RPC-6010G rackmount workstation, installation instructions and
configuration options.
Turn Off Power: When installing the RPC-6010G rackmount workstation,
make sure the power is off. Failing to turn off the power may cause severe
injury to the user and/or damage the system.
Certified Engineers: Only certified engineers and technicians should install
and modify the RPC-6010G rackmount workstation. Non-certified engineers
or technicians should not attempt to install the RPC-6010G rackmount
workstation.
Mounting: The RPC-6010G rackmount workstations are heavy devices.
When rack mounting the RPC-6010G rackmount workstation, please ensure
that at least two people are assisting with the procedure.
Anti-static Discharge: Electronic components like CPU cards and
backplanes must be installed into the RPC-6010G rackmount workstation.
Follow proper grounding procedures before installing these components.
4.1.2 Installation Prerequisites
Prepare the following before installing the RPC-6010G rackmount workstation:
Completely installed CPU card: The RPC-6010G rackmount workstation
CPU card is separately purchased. Before installing the RPC-6010G
rackmount workstation, a CPU card should be properly installed. The
following components may also have to be installed (refer to the user manual
that came with the CPU card):
o
CPU
o
Heatsink and cooling fan
o
Memory modules (DIMMs)
o
Compact flash disks
Page 18