Figure 4-12: backplane retention screws – IEI Integration RPC-6010G User Manual
Page 44
Advertising
RPC-6010G Rackmount LCD Workstation
Step 2:
Step 3:
Step 4:
Mount the backplane into the chassis. Make sure the backplane is positioned so
that when the CPU card and PCI/ISA expansion cards are installed, both the
CPU card and the PCI/ISA card I/O connectors face the I/O brackets on the rear
panel.
Align the retention screw holes in the backplane with the copper pillars installed
in Step 1.
Insert retention screws to secure the backplane to the chassis (Figure 4-12)
Step 0:
Figure 4-12: Backplane Retention Screws
Page 34
Advertising