IEI Integration RPC-6010G - Manual (Page 47)

RPC-6010G Rackmount LCD Workstation
Figure 4-14: Install the CPU Card
Step 5:
Step 6:
Step 1:
To secure the CPU card, reinsert the previously removed slot cover retention
screw.
If a PCI/ISA expansion card is not being installed, reinstall the dual CPU card
clamp and drive bay stabilizer bracket and the CPU card clamp. If a PCI/ISA
expansion card is being installed, proceed to the next section.
Step 0:
4.5.10 Install the PCI/ISA Expansion Card
To install a PCI expansion card or an ISA expansion card please follow the instructions
below.
Remove the slot cover retention screw to remove the slot bracket from the
chassis rear panel (Figure 4-13).
Page 37