Install the backplane, 8 install the backplane – IEI Integration RPC-6010G User Manual
Page 43
Advertising
RPC-6010G Rackmount LCD Workstation
4.5.8 Install the Backplane
To install a backplane, follow the instructions below.
Step 1:
Install the correct amount of copper pillars and plastic spacers into the base of
the chassis (Figure 4-11).
NOTE:
The backplane shown in Figure 4-11 is an example for reference only. The
location and number of copper pillars and plastic spacers depends on the
backplane being used.
Figure 4-11: Install Copper Pillars and Plastic Spacers
Page 33
Advertising