Remove the top cover, 1 remove the top cover, Figure 4-1: top cover left side retention screws – IEI Integration RPC-6010G User Manual
Page 35: Figure 4-2: remove top cover from chassis
Advertising
RPC-6010G Rackmount LCD Workstation
4.5.1 Remove the Top Cover
The top cover is secured to the RPC-6010G rackmount workstation with six screws (three
each on the left and right panels). To remove the top cover, please follow the steps below.
Step 1:
Remove the six top cover retention screws (three each on the left and right
panels). (See Figure 4-1)
Figure 4-1: Top Cover Left Side Retention Screws (Right Side Similar)
Step 2:
Remove the top cover from the chassis to reveal the internal components.
(See Figure
Step 0:
Figure 4-2: Remove Top Cover from Chassis
Page 25
Advertising