Installing components into the rpc-6010g, Nstalling, Omponents into the – IEI Integration RPC-6010G User Manual
Page 34: Rpc-6010g
Advertising
RPC-6010G Rackmount LCD Workstation
Step 10:
Step 11:
Step 12:
Step 13:
Step 14:
Connect all required cables.
Reinstall the dual CPU card clamp and drive bay stabilizer bracket.
Reinstall the CPU card clamp.
Close the top cover.
Mount the workstation.
Step 0:
4.5 Installing Components into the RPC-6010G
NOTE:
This section gives a generic description of the component installation process
for the RPC-6010G rackmount workstation.
WARNING:
Failure to follow the installation procedures outlined in this section may cause
severe damage to the RPC-6010G rackmount workstation. Please follow the
installation instructions carefully.
Page 24
Advertising