Figure 4-13: slot cover retention screw – IEI Integration RPC-6010G User Manual
Page 46
Advertising
RPC-6010G Rackmount LCD Workstation
Figure 4-13: Slot Cover Retention Screw
Step 2:
Step 3:
Step 4:
Remove the CPU card clamp. (See Section 4.5.2)
Remove the dual CPU card clamp and drive bay stabilizer bracket. (See
Section 4.5.3)
Slide the CPU card into the reserved PCI/ISA socket on the backplane. Make
sure the back edge of the CPU card slides into the plastic guide rails at the front
end of the chassis.
Page 36
Advertising