Figure 7-4: install ps/2 interface driver – IEI Integration RPC-6010G User Manual
Page 83
Advertising
RPC-6010G Rackmount LCD Workstation
Step 7:
An Install PS/2 interface driver screen appears (Figure 7-4). It is not necessary
to install the PS/2 interface driver. To continue click N
EXT
.
Figure 7-4: Install PS/2 Interface Driver
Step 8:
Four point calibration options are then selected (Figure 7-5). Four point
calibrations can be done every time a user boots up, during the next time the
system boots or never. Select if and when a four-point calibration should be
done. Click N
EXT
to continue.
Page 73
Advertising