Wiegmann WAX-MSSN4 Series - Manual (Page 12)

S S N 4 X S E R I E S E N C L O S U R E S
N E M A 4 X F L A N G E D S I N G L E D O O R D I S C O N N E C T
F12
www.hubbell-wiegmann.com
Data Subject To Change Without Notice
F E AT U R E S - S P E C I F I C AT I O N S
Industry Standards
UL 508, Types 4, 4X, 12, & 13
CSA Certified, Types 4 & 12
NEMA/EEMAC Types 4, 4X, 12, & 13
U L F i l e E 6 4 7 9 1
C S A F i l e L L 6 6 0 7 8
Construction
• Bodies and doors fabricated from
14 gauge 304 stainless steel
• Continuously welded seams ground
smooth
• Rolled lip around all sides of enclo-
sure opening excludes liquids and
contaminants
• All exterior hardware is stainless
steel
• All interior and exterior parts of
stainless steel enclosures are stain-
less steel except for print pocket
• Stainless steel door clamps are
provided around three sides of
doors for a watertight seal, addi-
tional door hardware is not required
Finish
• Enclosures have a grained finish on
all external surfaces
• Optional back panels are white
polyester powder over phosphatized
surfaces
• Optional “G” panels have a con-
ductive finish
Accessories
• Back panels (reference tables)
• Blank Adapter Plates are on page
F61
IMPORTANT Ordering Information
• See F2 & F15 for disconnect switch,
circuit breakers, operating handle
and operating mechanism.
SSN4X242108
• Body and door stiffeners provided
in larger enclosures for extra rigidity
• Doors removed by pulling stainless
steel continuous hinge pin
• Polyurethane poured-in-place gasket
• External mounting feet
• Collar studs for mounting optional
back panel
• Grounding provisions provided
• Bracket welded to door for attach-
ing disconnect interlock door catch
• Holes are provided in body for
mounting disconnect operating
handle and operating mechanism.
These enclosures are designed to
operate properly without the use of
door hardware
• Print pocket is provided
CATALOG NUMBER BODY/DOOR ENCLOSURE SIZE BACK PANEL CATALOG NUMBER* BACK PANEL
STEEL GAUGE H X W X D SIZE A X B
304 316L WHITE 304 SS “G”
SSN4X242108 SSN4X242108A 1 4 / 1 4 2 4 . 0 0 x 2 1 . 3 8 x 8 . 1 3 ( 6 1 0 x 5 4 3 x 2 0 7 ) NP2420 NP2420SS NP2420G 2 1 . 0 0 x 1 7 . 0 0 ( 5 3 3 x 4 3 2 )
SSN4X242508 SSN4X242508A 1 4 / 1 4 2 4 . 0 0 x 2 5 . 3 8 x 8 . 1 3 ( 6 1 0 x 6 4 5 x 2 0 7 ) NP2424 NP2424SS NP2424G 2 1 . 0 0 x 2 1 . 0 0 ( 5 3 3 x 5 3 3 )
SSN4X302508 SSN4X302508A 1 4 / 1 4 3 0 . 0 0 x 2 5 . 3 8 x 8 . 1 3 ( 7 6 2 x 6 4 5 x 2 0 7 ) NP3024 NP3024SS NP3024G 2 7 . 0 0 x 2 1 . 0 0 ( 6 8 6 x 5 3 3 )
SSN4X362508 SSN4X362508A 1 4 / 1 4 3 6 . 0 0 x 2 5 . 3 8 x 8 . 1 3 ( 9 1 4 x 6 4 5 x 2 0 7 ) NP3624 NP3624SS NP3624G 3 3 . 0 0 x 2 1 . 0 0 ( 8 3 8 x 5 3 3 )
SSN4X363108 SSN4X363108A 1 4 / 1 4 3 6 . 0 0 x 3 1 . 3 8 x 8 . 1 3 ( 9 1 4 x 7 9 7 x 2 0 7 ) NP3630 NP3630SS NP3630G 3 3 . 0 0 x 2 7 . 0 0 ( 8 3 8 x 6 8 6 )
SSN4X423112 SSN4X423112A 1 4 / 1 4 4 2 . 0 0 x 3 1 . 3 8 x 1 2 . 1 3 ( 1 0 6 7 x 7 9 7 x 3 0 8 ) NP4230 NP4230SS NP4230G 3 9 . 0 0 x 2 7 . 0 0 ( 9 9 1 x 6 8 6 )
SSN4X423712 SSN4X423712A 1 4 / 1 4 4 2 . 0 0 x 3 7 . 3 8 x 1 2 . 1 3 ( 1 0 6 7 x 9 4 9 x 3 0 8 ) NP4236 NP4236SS NP4236G 3 9 . 0 0 x 3 3 . 0 0 ( 9 9 1 x 8 3 8 )
SSN4X483712 SSN4X483712A 1 4 / 1 4 4 8 . 0 0 x 3 7 . 3 8 x 1 2 . 1 3 ( 1 2 1 9 x 9 4 9 x 3 0 8 ) NP4836 NP4836SS NP4836G 4 5 . 0 0 x 3 3 . 0 0 ( 1 1 4 3 x 8 3 8 )
SSN4X603712** SSN4X603712A** 1 4 / 1 4 6 0 . 0 0 x 3 7 . 3 8 x 1 2 . 1 3 ( 1 5 2 4 x 9 4 9 x 3 0 8 ) NP6036 NP6036SS NP6036G 5 7 . 0 0 x 3 3 . 0 0 ( 1 4 4 8 x 8 3 8 )
S S N 4 X S E R I E S S TA I N L E S S W A L L - M O U N T D I S C O N N E C T S
*Back panels must be ordered separately.
**Enclosures are supplied with closed cell neoprene gasket (not foam-in-place).