Wiegmann WAX-MSSN4 Series - Manual (Page 48)

W A X M - S S N 4 E N C L O S U R E S
N E M A 4 X T W O D O O R F L O O R M O U N T D I S C O N N E C T
F48
Applications
Enclosure having
the “WM” preferred
cutout are sized for
use with up to 200A
disconnect switches
and up to 400A cir-
cuit breakers unless
otherwise specified.
The “WM” preferred
cutout accepts the
smaller operating
handle whose mount-
ing hole centers are
4.677 in. apart. “WM” preferred cutouts are
standard in mild steel wall-mount enclo-
sures, modular enclosures and some select
large mild steel and standard stainless steel
offerings.
See Page F45 for Allen-Bradley, ABB,
Eaton Cutler Hammer, General Electric,
Siemens ITE & Schneider Square D
options.
IMPORTANT Ordering Information
• Disconnect switch or circuit breakers,
operating handle and operating mecha-
nism are not furnished with the enclosure
and must be ordered separately from the
disconnect manufacturer
• Disconnect ordering information is
located on page F50
• Review space occupied by disconnect
drawings on page F30 and disconnect
tables on pages F51-F60 to determine if
the disconnect device you are using will
fit the enclosure size you have selected
Construction
• Bodies and doors fabricated from
12 & 10 gauge 304 stainless steel.
• Removable 10 gauge steel back panels
are included and mounted on collar studs
• Continuously welded seams ground
smooth
• Body stiffeners provided for extra rigidity
• Heavy gauge continuous hinges to sup-
port each door
• Heavy duty lifting eyes and provisions for
fluorescent lighting are provided
• 3-PT 316L SS padlocking handles on all
doors
• Panel supports
• Center posts are removable to permit
easy panel installation
• Print pocket is provided
• Grounding provisions provided
• Doors are sealed with polyurethane
poured-in-place gasket
• Unless specified, the far right door in
considered to be the “master” door. All
other doors are considered slave doors.
• The mechanical interlock is activated by
the master door which prevents the slave
doors from being opened first. Doors can
be closed in any order
• Disconnects come with a universal
cutout which provides mounting for most
disconnect operators by using operator
adapters
Finish
• Except for back, exterior has a standard
grained finish
• Included back panels are white polyester
powder over phosphatized surfaces
Accessories
• See pages J1-J22
• Back panels (see reference tables)
U L F i l e E 6 4 7 9 1
C S A F i l e L L 6 6 0 7 8 WA72XM2818SSN4
F E AT U R E S - S P E C I F I C AT I O N S
“WM” PREFERRED
CUTOUT
WAXM-SSNR
CL
TOP OF DISCONNECT
TOP HOLE IN
DISCONNECT HANDLE
THIS SPACE
OCCUPIED BY
DISCONNECT
SWITCH AND
FUSE CLIP
(IF USED)
OR CIRCUIT
BREAKER
2.44 FOR 1 & 2 DOOR G
F
E
WB 4.06 PANEL
1.31 FOR 1 & 2 DOOR
CL
”WAXM-SSN4”Style Enclosure
Space Occupied by Disconnect
Note:
1. See pages F51-F60 for various brands of
disconnects for “E”, “F”, “G” and “WB” dim.
2. Disconnects will occupy space on panel
shown by dimensions “E”, “F” and “G”.
Wiring space “WB” is available when dis-
connect is installed in the enclosure.
3. When ordering 24.13 (613mm) deep
enclosures, long connecting rods must
be ordered. Long connecting rods are
available from disconnect manufacturers.
• ABB Controls flange-operated devices
• Eaton Cutler-Hammer C361 devices
• Eaton Cutler-Hammer C371 operating
mechanisms C371E and C371F, order
catalog number C371CS1 connecting
rod. For C371G and C371K, order cat-
alog number C371CS2 connecting rod.
• General Electric TDA devices, order
catalog number TDSR extended length
drive rod
• For Schneider Square D ® 9422
devices, order catalog number 9422-
R2 extra long operating rod(s). Some
devices require two rods.
Refer to National Electrical Code ® article
430-10(b) for wiring space required for line
side conductors to be connected to discon-
nect. Verify your application to determine if
wiring space is adequate.
Industry Standards
UL 508, Type 3R, 4, 4X & 12
CSA Certified, Type 12
NEMA/EEMAC Type 3R, 4, 4X & 12
Single Door Rating Pending UL (Ref: 4 & 4X)
www.hubbell-wiegmann.com
Data Subject To Change Without Notice