Wiegmann WAX-MSSN4 Series - Manual (Page 32)

F E AT U R E S - S P E C I F I C AT I O N S
Industry Standards
UL 508, Type 12
CSA Certified, Type 12
NEMA/EEMAC Type 12
U L F i l e E 6 4 7 9 1
C S A F i l e L L 6 6 0 7 8
W A X M - U S E R I E S E N C L O S U R E S
N E M A 1 2 H E AV Y D U T Y F R E E S TA N D I N G D I S C O N N E C T
www.hubbell-wiegmann.com
Data Subject To Change Without Notice
Applications
The Wiegmann universal cutout is used in
large freestand and floorstand enclosures.
Operator Adapter Kits are required in order
to install the various manufacturers’ hard-
ware. Note that 400 A (or greater) discon-
nect switches and 600 A (or greater) circuit
breakers need to use the “Large” or “High
Amp” cutout, which is provided in the
WA21ABVA kit for Allen-Bradley variable-
depth disconnect switches or the WA21ITE
kit for Siemens (and select other manufac-
turers) flex-cable devices. The “Large” or
“High Amp” cutout accepts the larger oper-
ating handle whose mounting hole centers
are 6.500-in. apart.
Allen-Bradley
• 1494V disconnect switches with flange-
mount variable depth operating mecha-
nisms and 1494V flange-mounted
variable depth operating mechanisms
for circuit breakers
• 140U flexible cable operating mecha-
nisms and 140U molded case circuit
breakers
• 1494C cable-operated disconnect
switches with flange-mount handles
• 194RC cable-operated flange-mount
handles for use with the NFPA 79 compli-
ant 194R IEC rotary disconnect switches
Allen-Bradley 1494V-R1, -R2 and -W2 oper-
ating handles and Allen-Bradley 1494F dis-
connect devices or 1494D circuit breaker
operators will NOT fit these enclosures.
• ABB Controls flange-mounted variable
depth operating mechanisms for discon-
nect switches and circuit breakers
• Eaton Cutler-Hammer Type C361 discon-
nect switches and operator mechanisms.
Eaton Cutler-Hammer Type C371 circuit
breaker operating mechanisms. Also
Type SM safety handle mechanisms and
Flex Shaft
™ handle operators for circuit
breakers
• The mechanical interlock is activated by
the master door which prevents the slave
doors from being opened first. Doors can
be closed in any order
• Disconnects come with a universal cutout
which provides mounting for most dis-
connect operators by using operator
adapters
• FTC rolled lip around all sides of enclo-
sure opening excludes liquids and conta-
minants
Finish
• ANSI 61 gray polyester powder inside
and out over phosphatized surfaces
• Included back panels are white polyester
powder over phosphatized surfaces
Accessories
• See pages J1-J22
• Blank adapter plates on pages F61
IMPORTANT
• Disconnect switch or circuit breakers,
operating handle and operating mecha-
nism are not furnished with enclosure
and must be ordered separately from the
disconnect manufacturer
• Operator adapter plates are required with
this enclosure and must be purchased
separately. See pages F61 to select the
proper operator adapter for the brand
and type of disconnect being used
• Disconnect ordering information is lo-
cated on page F39
• Review space occupied by disconnect
drawings on page F38 and disconnect
tables on pages F51-F60 to determine if
the disconnect device you are using will
fit the enclosure size you have selected
WA72XM2718U
F32
• General Electric Type STDA flange han-
dles and variable depth operating mech-
anisms for disconnect switches and
circuit breakers. Also Spectra Flex
™ cable
operators for circuit breakers
• Siemens ITE Max-Flex ™ flange-mounted
variable depth operating handles for dis-
connect switches and circuit breakers
• Schnider Square D ® disconnect switches
and circuit breakers used with Class 9422
flange-mounted variable depth operating
mechanisms or cable mechanism
These enclosures will not receive Class
9422 bracket-mounted disconnect
devices or Class 9422TG1 or TG2
devices
Construction
• Bodies and doors fabricated from
10 gauge steel.
• Removable 10 gauge steel back panels
are included and mounted on collar studs
• Continuously welded seams ground
smooth
• Body stiffeners provided for extra rigidity
• Heavy duty lifting eyes and provisions for
fluorescent lighting are provided
• Heavy gauge continuous hinges
support each door
• 3-point padlocking handles on all doors
• Panel supports
• Center posts are removable to permit
easy panel installation.
• Print pocket is provided
• Grounding provisions provided
• Doors are sealed with polyurethane
poured-in-place gasket
• Unless specified, the far right door is
considered to be the “Master” door. All
other doors are considered slave doors