Wiegmann WAX-MSSN4 Series User Manual
Page 8
N 4 1 2 - C S T D & N 4 1 2 - C S S S T D S L O P E T O P D I S C O N N E C T
U LT I M AT E S E R I E S E N C L O S U R E S
F8
www.hubbell-wiegmann.com
Data Subject To Change Without Notice
F E AT U R E S - S P E C I F I C AT I O N S
Industry Standards
UL 508, Types 4, 4x, 12, & 13
CSA Certified, Types 4, 4x, 12, & 13
NEMA/EEMAC Types 4, 4x, 12, & 13
U L F i l e E 6 4 7 9 1
C S A F i l e L L 6 6 0 7 8
Applications
Hubbell Wiegmann N412CDTD &
N412CSSSTD Ultimate Series
Disconnects are designed to house
and protect electrical and electronic
components from harsh, dirty environ-
ments. For use in installations where
dirt, dust, oil, water or other contami-
nants are present. Streamlined
styling, latching and attractive
durable finish complement any high
tech electronic equipment.
Construction
• Bodies and doors fabricated from
14 gauge steel (optional 304 also
available)
• Continuously Plasma welded seams
• Increased tub opening for better
access
• 20 Degree sloped top
• Sloped “Top tub flange”
• Concealed hinges
• Doors are interchangeable and
easily removable
• Grounding provisions provided
• 1/4-turn semi-flush oil tight latches
are supplied to hold door securely
closed
• Print pocket is provided
• Doors are sealed with poured-in-
place polyurethane gasket
• Mounting holes in rear of enclosure
• Studs for mounting optional back
panel (the Ultimate back panels
have increased in size to accom-
modate larger foot-print installa-
tions)
• Ultimate Accessory Driven
• Door handle and latching hardware
are provided
• Door latching system installed on
door with slotted insert defeater
mechanism to open
• Latching system interlocks with the
disconnect handle for added safety
• 2pt latch system up to 36" in height
and 3pt latch system on enclosures
42" and higher
Finish
• ANSI 61 gray polyester powder
inside and out over phosphatized
surfaces
• Stainless: interior = standard com-
mercial finish, ext = standard
grained finish
• Optional back panels are white
polyester powder over phospha-
tized surfaces
• Optional “G” panels have a con-
ductive finish
Accessories
• Back panels (reference tables)
• See pages J1-J22
IMPORTANT Ordering Information
• See F2 for disconnect switch, circuit
breakers, operating handle and oper-
ating mechanism.
N412242608CSSSTD