Yokogawa EJX115A - Manual (Page 46)

<8. Parameter Summary>
44
IM 01C25A01-01E
No. Parameter name Item R/W *1 Content Default value
Applicable model
U
pl
oa
d
da
ta
F P L
G ALARM SET Alarm setting
G10 P AL MODE Alert mode W INHIBIT, HI. AL DETECT,
LO. AL DETECT, or HI/LO.
AL DETECT
INHIBIT    —
G11 P HI. AL VAL High side alert value W -32000 to 32000, unit
specified in C20
100.000 kPa    —
G12 P LO. AL VAL Low side alert value W -32000 to 32000, unit
specified in C20
-100.000 kPa    —
G20 SP AL MODE Static pressure alert
mode
W INHIBIT, HI. AL DETECT,
LO. AL DETECT, or HI/LO.
AL DETECT
INHIBIT  —  —
G21 SP HI. AL VAL High side alert value of
SP* 2
W -32000 to 32000, unit
specified in D30
 —  —
G22 SP LO. AL VAL Low side alert value
of SP
W -32000 to 32000, unit
specified in D30
0.00000 MPa  —  —
G30 T AL MODE Temperature alert mode W INHIBIT, HI. AL DETECT,
LO. AL DETECT, or HI/LO.
AL DETECT
INHIBIT    —
G31 T HI. AL VAL High side alert value of
temperature
W -50 to 130 120 degC    —
G32 T LO. AL VAL Low side alert value of
temperature
W -50 to 130 -40 degC    —
G50 AUTO RECOVER Auto-recover from
sensor error
W OFF or ON ON    —
G60 SELF CHECK Self-diagnostics R See A60    —
H AUTO SET Automatic setup
H10 AUTO P LRV Lower range value auto
setup
W -32000 to 32000, unit
specified in C20
As specified    —
H11 AUTO P URV Upper range value auto
setup
W -32000 to 32000, unit
specified in C20
As specified    —
H20 AUTO SP LRV SP lower range value
auto setup
W -32000 to 32000, unit
specified in D30
0.00000 MPa  —  —
H21 AUTO SP URV SP upper range value
auto setup* 2
W -32000 to 32000, unit
specified in D30
 —  —
H60 SELF CHECK Self-diagnostics R See A60    —
I DISP SET Display setting
I10 DISP OUT1 LCD output 1 W PRES, PRES %, ENGR.
PRES, SP, or SP %
PRES %    
I11 DISP OUT2 LCD output 2 W PRES, PRES %, ENGR.
PRES, SP, SP %, or ---
---    
I12 DISP OUT3 LCD output 3 W See I11 ---    
I13 DISP OUT4 LCD output 4 W See I11 ---    
I20 P DISP MODE % display mode W LINEAR or SQUARE ROOT LINEAR    
I21 PRES % RESO % display resolution W NORMAL or HIGH
RESOLUTION
NORMAL    
I30 ENGR. UNIT User set engineering
unit
W 8 alphanumeric characters    
I31 EASY EU SET Engineering unit select W    —
I32 ENGR. EXP Exponents W ---, Ч10, Ч100, Ч1000 ---    
I33 ENGR. LRV User set lower range
limit
W -32000 to 32000, unit
specified in I30
0.00    
I34 ENGR. URV User set upper range
limit
W -32000 to 32000, unit
specified in I30
100.00    
I35 ENGR. POINT Decimal place of user
set
W 0 to 4 1    
I40 BAR INDICATR Bar indicator W OFF or ON ON    
I41 POWER ON INF Display when powering
on
W OFF or ON ON    —
I60 SELF CHECK Self-diagnostics R See A60    —
*1: R/W: R = Read only, W = Read & Write
*2: The default value shows MWP (Maximum working pressure) of the capsule.
Since the working pressure limit varies according to the Model, refer to the General Specifications section in each user’s manual.