Yokogawa Removable Chassis DX1000N - Manual (Page 221)

6-18
IM 04L41B01-01E
6.8 Loading and Displaying the Measured Data in
the Storage Medium
Load the display or event data file saved on the external storage medium and display the
waveform. The loaded data is shown on the historical trend display.
For the operations on the historical trend display, see section 4.3.
Procedure
• Loading a File
1. Carry out the procedure below to show the display.
Press MENU (to switch to setting mode), and select the File tab > Load display
data or Load event data. Press the CF or USB soft key * , and then press DISP/
ENTER.
* When a CF card and a USB flash memory (/USB1 option) are being used.
2. Press the arrow keys to select a directory, and press DISP/ENTER. The files in
the directory are displayed. The root directory is denoted by [/].
3. Press the arrow keys to select a file, and press DISP/ENTER.
The file is loaded, and the waveform is displayed in the historical trend.
Note
• As shown in the table below, the display data and event data file name extensions change
depending on whether or not the /AS1 advanced security option is installed.
Advanced Security Display Data Files Event Data Files
Not installed .DAD .DAE
Installed .DSD .DSE
• For details on how to use the Sort, , and soft keys, see section 6.7.