Yokogawa Removable Chassis DX1000N - Manual (Page 83)

2-16 IM 04L41B01-01E
Controlling the DX
Control the DX by pointing the infrared output section of the remote control terminal to
the light-receiving section on the DX. Control the DX while checking the results on the
DX screen.
Note
• The remote control terminal cannot be used to control the Favorite key.
• When a specific key operation is possible on the DX, the corresponding key on the remote
control terminal is activated. For example, the operation for entering a character string is
activated when a window for entering a character string is displayed on the DX screen.
• You cannot control the DX using the remote control terminal, if the remote control terminal is
in the ID number setup mode.
• On models with the /M1 math option or /PM1 pulse input option, use the keys on the DX
to enter the computing equation of the computation channel. Computing elements are not
assigned to the keys on the remote control terminal.
• Correspondence with the DX Keys
Right arrow key
ESC key
Left arrow key
FUNC key
DISP/ENTER key
MENU key
Soft keys
User key
Up arrow key
START key
Down arrow key
Character input
keys
Character input
keys
Hold down SHIFT
and press F3/F7.
STOP key
Character type switch key for character input keys (see the next page)
Delete key
Deletes the character at the cursor position when inputting characters.
Space key
Enters a space at the cursor position when inputting characters.
2.10 Controlling the DX with the Remote Control Terminal (/KB1 and /KB2 Options)