Yokogawa Button Operated MV2000 - Manual (Page 123)

5-7 M-4660
Screen Operations
1
2
3
4
5
6
7
8
9
10
11
12
13
App
Index
• Changing the Trend Update Rate
1. Press T/DIV to display the trend interval configuration screen.
2. Select the interval using the soft keys. Waveforms will be displayed at the set
trend update rate.
Explanation
• Trend Display: GROUP CHANNEL Display/ALL CHANNEL Display *
GROUP CHANNEL displays the waveforms of the selected group’s channels. ALL
CHANNEL displays the waveforms of all channels that have been set to be recorded.
* On the RD-MV2010, RD-MV2020, RD-MV2030, RD-MV2040, and RD-MV2048, if the device
is equipped with external input channels (/MC1 option), all channel display is not possible
with trend update rates of 15 s/div or 30 s/div.
• AUTO ZONE
Displays trend waveforms separately by evenly dividing display areas (zones) among
a group’s channels.
With AUTO ZONE OFF
With AUTO ZONE ON
• FINE GRID
Display the fine grid when the normal grid is too wide for reading measured values.
The fine grid can be used in the trend and historical trend displays. The fine grid
places an additional four lines between the normal grid lines.
With FINE GRID OFF With FINE GRID ON
5.2 Displaying Measured Data with Waveforms (Trend), Numbers (digital), or Bar Graphs