Yokogawa Button Operated MV2000 - Manual (Page 262)

12-23 M-4660
Troubleshooting and Maintenance
1
2
3
4
5
6
7
8
9
10
11
12
13
App
Index
12.5 Recommended Replacement Periods for Worn
Parts
To maintain the reliability of the MV and to use the MV in a good condition for an
extended time, we recommend that parts be replaced periodically. The replacement parts
may change to accommodate preventive maintenance over extended time. Be sure to
check with your nearest Omega dealer.
The following table shows the recommended replacement period for expendable parts.
The replacement period shown here applies when the MV is used under standard
operating conditions. For the actual replacement period, consider the actual conditions of
use. Replacement of parts will be carried out by a Omega engineer or a Omega-certified
engineer. Contact your nearest Omega dealer when such replacement is necessary.
RD-MV1000
Item Replacement
Period
Name Quantity Used Notes
LCD 5 years Bezel Assembly 1
Battery 10 years Battery Assembly 1
Aluminum
electrolytic
capacitor 5 years Power Supply
Assembly
*
1
5 years AD Assembly * Depends on the model
* Replacement period when used at the upper limit of the normal operating temperature (40°C).
The replacement period varies depending on the operating temperature and the MV specifications. If the
operating temperature is 30°C, it may be possible to use the part for more than 10 years.
RD-MV2000
Item Replacement
Period
Name Quantity Used Notes
LCD 5 years Bezel Assembly 1
Battery 10 years Battery Assembly 1
Aluminum
electrolytic
capacitor 5 years Power Supply
Assembly
*
1
5 years AD Assembly * Depends on the model
* Replacement period when used at the upper limit of the normal operating temperature (40°C).
The replacement period varies depending on the operating temperature and the MV specifications. If the
operating temperature is 30°C, it may be possible to use the part for more than 10 years.
Note
• The LCD replacement period indicates the half life of the brightness when the brightness
is set to the factory default setting. The half life is shortened as the brightness is set
higher. The deterioration of brightness varies depending on the condition of use, and its
determination is subjective. Consider these points when determining the actual replacement
period.
• The LCD color may turn yellowish over time. The discoloration tends to progress faster as
the brightness is set higher.