Index, Switching the current project, Changing the password – Yokogawa DAQWORX User Manual
Page 29
2-5
IM WX13-01E
Entering Settings (Launcher)
2.3 Setting Up Projects
1
2
3
4
5
Index
6
Switching the Current Project
Carry out the following procedure to switch to a different project.
Procedure
1.
Choose File > Project Settings from the Launcher menu bar. The Project Setting
dialog box opens.
2.
Choose the desired project from the Project list box.
3.
If the Use Password Protection check box is selected in the project that you
selected, the Password Input dialog box opens.
4.
Enter the password and click OK. The dialog box closes.
5.
Click OK. The Project Setting dialog box closes and the selected project is
opened.
Note
If the file list was displayed in the selected project the last time you exited the program, the file
list appears when you start the program this time.
Changing the Password
Carry out the following procedure to change the password when you are using the
password protection.
Procedure
1.
Choose Project Settings from the File menu. The Project Setting dialog box
opens.