Index, Entering the display conditions for each group – Yokogawa DAQWORX User Manual

Page 90

Advertising
background image

5-7

IM WX13-01E

Displaying Logged Data (Historical V

iewer)

1

2

3

4

5

Index

6

Showing/Hiding the Waveform, Y-Axis, Trip 1, and Trip 2

• Click the waveform number, y-axis, trip 1, and trip 2 check boxes to switch between

show (blue) and hide.

• If consecutive cells are selected, you can click the tool cell at the bottom to collectively

switch the show/hide setting of all the cells in the selected range.

Using the Shortcut Buttons

There are four kinds of shortcut buttons.

You can enter a setting on every cell in the range all at once. If a range of waveform

numbers is not selected, the action applies to all waveform numbers.

A: Shows or hides the selected items in the column.
B: Channel numbers are filled from the first cell in the selection to the last, each channel

being assigned a number 1 higher than the last.

C: Copies the first value in the selected range to all items in the selected range.
D: Restores the default values.

Saving the Settings

Click OK to save the settings and close the General Display Settings dialog box.

Click Cancel to cancel the settings and close the General Display Settings dialog box.

Entering the Display Conditions for Each Group

Up to 32 channels can be assigned to a group. A maximum of 50 groups can be used.

The General Display Settings of Historical Viewer differ from that of Data Monitor in the

following points.

• There is no Form item.
• There is no Meter Type item.
• There is no Apply button.
• There is a Scale Calc button.

Procedure

Click General Settings on the toolbar or choose View > General Settings from the menu

bar. The Detailed Settings dialog box opens.

Color

Display range

Channels to be registered

Set the trip point

Show or Hide

Group name

Waveform display zone

Turn ON/OFF the trip line display

Y-axis display

Axis type

Group tab

Display type

5.2 Setting the Display Conditions

Advertising