Yokogawa DAQWORX - Manual (Page 64)

4-4 IM WX13-01E
Alarm Monitor
You can switch between Overview and Log by clicking the tab.
Overview Display
Displays the alarm conditions by groups.
Display Cursor’s Value
Displays the alarm status within the group.
Switch between overview and log
Alarm Status Display
Green lamp: No alarm is activated in the channels registered in the group
whose waveform display is turned ON. Or, no alarm is specified
in any of the channels.
Red lamp: Alarm is activated in at least one of the channels registered in
the group whose waveform display is turned ON.
Blinking yellow ring: Unacknowledged alarms exist.
Acknowledging Alarms
If a blinking yellow ring is displayed around the alarm lamp, there are unacknowledged
alarms.
Procedure
You can clear the ring by carrying out one of the following procedures.
• Click the group on which the blinking ring is displayed.
• Choose Alarm Hold Reset from the View menu to clear all the rings that are displayed.
4.1 Displaying Waveforms on Monitor Screens