Yokogawa DAQWORX - Manual (Page 50)

2-26 IM WX13-01E
2.4 Entering Data Logging Conditions
2. Set the start and end channels for the top line number (see steps 1 and 2 in,
“Entering Settings One at a Time.”)
3. Click the shortcut button.
All settings are filled down through the selection.
Saving Modified Files
• Specifying an Output Folder
Specify the same folder (the output folder specified in the logging setting screen), or
a separate folder in which to save data files. If you specify a separate folder, you can
select an existing folder, or create a new folder.
1. Select the Same folder as Data File folder or Selects folder check box. If you
select Same folder as Data File folder, the settings are complete. If you select
Selects folder, proceed to the next step.
2. Click Browse. The Browse folders dialog box opens.
• Selecting an Existing Folder for the Output Folder
3. Select an existing folder.
• Creating a New Output Folder
3. Click the location in which you wish to create a folder.
4. Click New Folder. The Create New Folder dialog box opens.
5. Confirm the current folder, enter a folder name, and click OK. Up to 256 characters
can be input for folder names. The dialog box closes, and the folder is created.