Yokogawa DAQWORX - Manual (Page 69)

4-9 IM WX13-01E
Monitoring Data (Data Monitor)
1
2
3
4
5
Index
6
Note
• Dragging the Trip Line
You cannot drag the trip line on the circular monitor (page 4-17). To change the position of
the trip line, change the value in the General Display Settings dialog box.
• Waveform Display Limit
When the measured data is below the minimum display range, the waveform is displayed
at the minimum value position; when the measured data is above the maximum value, the
waveform is displayed at the maximum display position.
Setting the Time Axis
Procedure
Choose the time per cycle from the Time-Axis menu.
Note
Up to 1800 points of data can be displayed (30 minutes when the scan interval is set to 1 s and
5 hours when the scan interval is set to 10 s).
Changing the Alarm Indication Position
You can select whether alarms are displayed on the inside or the outside of the
waveform display section of the circular screen.
Procedure
Choose Alarm Inside or Alarm Outside from the View menu.
Alarm Inside Alarm Outside
4.1 Displaying Waveforms on Monitor Screens