Yokogawa DAQWORX - Manual (Page 47)

2-23 IM WX13-01E
Entering Settings (Launcher)
2.4 Entering Data Logging Conditions
1
2
3
4
5
Index
6
Changing Settings
1. Click the group number for the settings you wish to change.
2. Select the channels you wish to change using the No. check boxes.
Specifying Channels
3. Click a channel cell. The Channel No. dialog box opens.
Note
Channels not active in the channel settings being downloaded from the monitor server are
dimmed in the channel information dialog box.
4. Select the desired channels.
Up to 32 channels can be specified for a group.
Entering a Group Name
5. Click the Group Name box and enter the group name using up to 16 alphanumeric
characters.
The group settings are applied to Data Monitor and data viewer.
The settings entered here are used by data viewer when redisplaying data files.
Also, you can apply display conditions to Data Monitor.
Applying Display Settings to Data Monitor
1. Click the Updates display settings to Data Monitor check box.
2. Click Apply or OK.
The settings are applied to Data Monitor.