Assigning display limits, Turning on/off the waveform display, Adjusting the brightness – Yokogawa DAQWORX User Manual

Page 78

Advertising
background image

4-18

IM WX13-01E

Assigning Display Limits

You can specify how to display the waveform outside the display range.

Procedure

Click Clip on the toolbar or choose Clip from the Y-Axis menu.

Clip

The waveform display range along the Y-axis is limited to the minimum and maximum

values of the scale specified in the General Display Settings. Measured data that

is smaller than the scale (minimum) is displayed as a minimum value on the scale;

measured data that is greater than the scale (maximum) is displayed as a maximum

value on the scale.

• Display example when display limits are assigned on the displayed waveform

• Display example when display limits are not assigned on the displayed waveform

Turning ON/OFF the Waveform Display

To make a specific waveform stand out, you can hide other waveforms.

Procedure

Click the check box below the zone bar to turn ON (blue)/OFF the waveform display.

Grid brightness adjustment knob

(see “Adjusting the Brightness”)

Brightness adjustment knob of the waveform display area

(see “Adjusting the Brightness”)

Check box used to turn ON/OFF the waveform display

Zone bar

Specifying the Thickness of the Waveform Display Lines (Trend and Circular
Monitor Screen)

Procedure

Choose Normal Line, Medium Line, or Thick Line from the View menu.

Adjusting the Brightness

You can adjust the brightness of the grid and background.

Procedure

Drag the grid brightness adjustment slider to change the grid brightness.

Drag the brightness adjustment slider of the waveform display area to change the are

brightness.

4.3 Changing the Waveform Display

Advertising