Yokogawa DAQWORX - Manual (Page 77)

4-17 IM WX13-01E
Monitoring Data (Data Monitor)
1
2
3
4
5
Index
6
• Multi-Axis Zone
Displays the waveforms and multiple Y-axis (scale) in the zone specified in the
General Display Settings.
When Data Monitor display updating is paused, you can add/delete the Y-axis by
carrying out the following procedure.*
When adding a Y-axis: In the zone display area, drag the zone bar to be displayed
to the waveform display area.
When deleting a Y-axis: In the waveform display area, drag the Y-axis to be deleted
to the zone display area.
Drag & drop the zone bar corresponding
to the Y axis (scale) you wish to display.
Drag & drop the Y axis (scale) to be deleted.
Note
The waveform display area shows a grid that corresponds to the left-most Y-axis (scale). In
addition, only the trip lines of the channels that have the left-most Y-axis are displayed.
4.3 Changing the Waveform Display