Triton 9661 Operation Manual - Manual (Page 162)

5-116
S
ECTION
5 - M
ANAGEMENT
F
UNCTIONS
T
RITON
S
YSTEMS
, I
NC
.
M
ULTI
-C
ASSETTE
C
ASH
D
ISPENSER
O
PERATION
M
ANUAL
M
ODELS
9640/9641/9660/9661
F
UNCTION
: DIAL MODE
F
ACTORY
D
EFAULT
: ‘DTMF’
A
CCESS
I
NSTRUCTIONS
:
1.) Select TERMINAL CONFIGURATION from the
MANAGEMENT FUNCTIONS menu.
2.) Select SET TERMINAL PARAMETERS.
3.) Select TELEPHONE.
4.) Select the MODEM SETUP option.
5.) Select DIAL MODE.
D
ESCRIPTION
:
The modem is configured to dial in either the touch-tone mode (DTMF), or in the rotary (PULSE)
mode. Consult with the local phone company to determine which option is supported. After
selecting the dial mode, be certain to execute the RESET/TEST MODEM function. The new dial
mode does not take effect until you do this. The factory default for the function is DTMF.
E
RROR
C
ONDITIONS
:
If the local phone exchange does not support touch-tone, and the terminal is configured for DTMF
mode, no calls will be completed. Rotary will work on touch-tone systems, but should not be used
if touch-tone is available. Rotary mode will dial much slower than DTMF.