Triton 9661 Operation Manual - Manual (Page 72)

5-26
S
ECTION
5 - M
ANAGEMENT
F
UNCTIONS
T
RITON
S
YSTEMS
, I
NC
.
M
ULTI
-C
ASSETTE
C
ASH
D
ISPENSER
O
PERATION
M
ANUAL
M
ODELS
9640/9641/9660/9661
F
UNCTION
: INJECT NEW CASSETTE ID
F
ACTORY
D
EFAULT
: N/A
A
CCESS
I
NSTRUCTIONS
:
1.) Select DIAGNOSTICS from the MANAGE-
MENT FUNCTIONS screen.
2.) Select the MORE DIAGNOSTICS option.
3.) Select the INJECT NEW CASSETTE ID option.
D
ESCRIPTION
:
Each Note Cassette contains onboard memory that enables it to store it’s own identification
code. This option allows you to inject a new ID into a Note Cassette. This option will prompt
you to insert the cassette you want to use into the top feed channel, and will then provide options
for injecting a designation of ‘A’, ‘B’, ‘C’, or ‘D’ into the cassette in this position. When the ID
has successfully been injected, the word DONE will appear. If the operation fails, an error
message will be displayed.
The CASSETTE ID has no direct correlation to the physical position of the cassette within the
unit, although in most instances the cassette identified as ‘A’ will be placed in the top position,
‘B’ in the second, ‘C’ in the third, and ‘D’ in the fourth position. This is not a requirement,
however, since the ID code allows the dispensing mechanism (and the Cash Dispenser control
system) to locate the cassette no matter which slot it is in.
This function will automatically perform an UNLOCK operation so that the cassettes can be
rearranged as needed to facilitate the operation. At the conclusion of the procedure, after each
cassette has been placed in its appropriate location, use the LOCK/UNLOCK function to LOCK
the cassettes into place.
E
RROR
C
ONDITIONS
:
If the operation fails, an error message will be displayed.