Triton 9661 Operation Manual - Manual (Page 42)

4-6
S
ECTION
4 - H
ANDLING
C
ASSETTES
M
ULTI
-C
ASSETTE
C
ASH
D
ISPENSER
O
PERATION
M
ANUAL
T RITON S YSTEMS , I NC .
M
ODELS
9640/9641/9660/9661
Continue to support the bottom of the cassette to keep
it level as you place it on a table or other flat surface.
The loading arm should then be folded down, which
will raise the rear of the cassette and allow gravity
to help keep the notes neatly stacked during the load-
ing process.
O
PENING
N
OTE
C
ASSETTES
1. Insert the key into the cassette lock. To unlock the cassette, apply inward pressure on the key
while turning it clockwise to the stop position (approximately a quarter-turn). Open the cas
sette by simultaneously pressing the release button and lifting the lid. Flip the lid back fully,
allowing it to rest on the table or other flat surface.
2. Move the pusher plate to the rear of the cassette (toward the handle). Ensure the pusher plate is
fully back. It should stay in this position.
Figure 4-8. Cassette Loading Arm Down.
Figure 4-9. Key
Inserted.
Figure 4-10. Release Button. Figure 4-11. Lid Open and Pusher Plate Back.