Triton 9661 Operation Manual - Manual (Page 249)

D-7
T RITON S YSTEMS , I NC .
M
ULTI
-C
ASSETTE
C
ASH
D
ISPENSER
O
PERATION
M
ANUAL
A
PPENDIX
D - C
ASH
D
ISPENSER
I
NSTALLATION
I
NSTRUCTIONS
M
ODELS
9640/9641/9660/9661
2.) If included: install the lamp in the Sign Housing by removing the two screws that secure
the front of the Sign Housing to its rear panel. Plug the 9 watt florescent tube (included
in the accessory kit) into its socket. Install the front of the Sign Housing and secure it in
place with the two screws. Plug the AC power cord coming from the Sign Housing into
the AC outlet on the power supply.
3.) Turn the power switch located inside the top of the cabinet to ON (“I”). Verify the lamp
inside the Sign Housing is illuminated.
4.) Load the receipt printer with paper making sure that the receipt paper roll feeds from the
top of the roll. Once the end of the paper is inserted into the printer it will automatically
feed to the output. Close the Control Panel.
5.) Install currency in the cassettes and insert and them into the dispensing mechanism. Re-
fer to Section 4 of the Model 9640 Cash Dispenser Operation Manual for detailed infor-
mation and procedures concerning handling cassettes.
6.) Press both the <BLUE> key and the <1> key on the keyboard at the same time. A menu
is displayed that allows you to select customer or management functions. Select the
MANAGEMENT FUNCTIONS menu by pressing the uppermost right function key on
the keypad. Now enter the factory default master password of “123456” to enter the
management mode. Select the DIAGNOSTICS option from the MANAGEMENT
FUNCTIONS main menu and perform the Test Dispense operation as outlined below.
T
EST
D
ISPENSE
The Test Dispense command instructs the dispenser to send one note from each note cassette
into the reject cassette. Although this test exercises the dispenser no bills actually leave the
mechanism. This command returns the test results from the dispenser as outlined in Section 5
and Section 8 of the operations manual. If the test result is not correct, follow the instructions as
outlined in these sections of the manual. Press the EXIT option until you are returned to the
MANAGEMENT FUNCTIONS main menu. Refer to Section 3 and Section 5 of the operations
manual for additional Cash Dispenser initial setup procedures.