Triton 9661 Operation Manual - Manual (Page 184)

5-138
S
ECTION
5 - M
ANAGEMENT
F
UNCTIONS
T
RITON
S
YSTEMS
, I
NC
.
M
ULTI
-C
ASSETTE
C
ASH
D
ISPENSER
O
PERATION
M
ANUAL
M
ODELS
9640/9641/9660/9661
F
UNCTION
: COMMUNICATION HEADER
F
ACTORY
D
EFAULT
: PROCESSOR-SPECIFIC
A
CCESS
I
NSTRUCTIONS
:
1.) Select TERMINAL CONFIGURATION from the
MANAGEMENT FUNCTIONS menu.
2.) Select SET TERMINAL PARAMETERS.
3.) Select MORE.
4.) Select COMMUNICATION HEADER.
D
ESCRIPTION
:
The COMMUNICATION HEADER is an optional feature that is only applicable to certain
processors. When a specified processor requires the use of the COMMUNICATIONS HEADER it
must be ENABLED and have the correct data in the header data field. The COMMUNICATION
HEADER data field consists of alphanumeric characters.
To enter a digit 0-9, press the key that has that digit. To enter a letter, first press the <BLUE> key,
then press the key that has the letter you want on it. The first press of the key will display the first
character above the number. Subsequent presses will display the characters in sequence. When
the character you want is displayed, press the <RIGHT ARROW> key to ‘lock in’ the character. If
your next character is a letter, you must press the <BLUE> key again.
E
RROR
C
ONDITIONS
:
Enabling the COMMUNICATION HEADER when using a processor that doesn’t use this feature
will prevent any type of transaction from completing. Disabling or having incorrect data in the
COMMUNICATION HEADER data field (if the feature is required) will also prevent any type of
transaction from processing.