Triton 9661 Operation Manual - Manual (Page 172)

5-126
S
ECTION
5 - M
ANAGEMENT
F
UNCTIONS
T
RITON
S
YSTEMS
, I
NC
.
M
ULTI
-C
ASSETTE
C
ASH
D
ISPENSER
O
PERATION
M
ANUAL
M
ODELS
9640/9641/9660/9661
F
UNCTION
: BACKUP NUMBER
F
ACTORY
D
EFAULT
: NONE
A
CCESS
I
NSTRUCTIONS
:
1.) Select TERMINAL CONFIGURATION from the
MANAGEMENT FUNCTIONS menu.
2.) Select SET TERMINAL PARAMETERS.
3.) Select MORE.
4.) Select TRITON CONNECT.
5.) Choose BACKUP NUMBER.
D
ESCRIPTION
:
The BACKUP NUMBER function is used to enter a backup number that the terminal can use for
calling back the Triton Connect computer.
When this function is selected, the current phone number is displayed (if nothing appears on the
screen, no number is set). Select CHANGE to blank the current entry, and then enter the desired
phone number. The phone number may be up to 15 digits long. It can also contain a dialing prefix,
such as a ‘9’ for an outside line, if necessary. If you need to pause after the prefix, place a comma
in the number for a two-second delay at that point. Press the <BLUE> key, then the <0> key,
followed by the <RIGHT ARROW> key to select the comma character. Make sure to enter the
long distance prefix ‘1’ if you are dialing an 800 number or a toll long distance number. Do not
enter dashes in the number.
E
RROR
C
ONDITIONS
:
There are no error conditions directly associated with this function.