In-Situ RuggedReader Operators Manual for Blue RuggedReader - Manual (Page 14)

14
2 GETTING STARTED
This chapter repeats the installation instructions in the RuggedReader
Quick Start guide. If you used the Quick Start guide to set up your
RuggedReader, you completed Steps 1-5.
STEP 1: INSTALL THE BATTERY PACK
1. Slowly unhook and lift up the bottom latch of the hand
strap. CAUTION: Do not let the hand strap hook hit the
display.
2. Press on the battery door and slide the latch to the
right to unlock it.
3. Remove the battery door.
4. Insert the battery pack so battery contacts match up.
TIP: If you used
the Quick Start
guide to set up
your RuggedReader, you
completed Steps 1-5.
➔
➔
Press
here
➔
➔