In-Situ RuggedReader Operators Manual for Blue RuggedReader - Manual (Page 66)

66
0055450 rev. 002 10/07 Rugged Reader Operator’s Manual
SECTION 7: CARE AND MAINTENANCE
3. Apply water or a mild cleaning solution such as Windex or 409 to a
microfiber cloth and gently wipe off the touchscreen. Other approved
cleaners include Citrus Wonder and Citrus All Purpose Cleaner.
CAUTION: Do not use tissues, paper towels, or harsh cleaning agents
to clean the touchscreen.
4. If you used a cleaning solution, rinse the touchscreen with water and
dry it with a microfiber cloth.
5. Press the power button to resume the device.
Case Overmolding
Clean the rubber-like overmolding that surrounds the case with a cloth and
a mild cleaning solution like 409 or Citrus Wonder. Rinse with water and
wipe dry.
Communications Module
This is the area housing the USB port, DC jack, and serial port. To clean
the communications module, run it under a faucet. Use a soft toothbrush
or toothpick to clean out any remaining dirt. Shake or blot to dry.
Speaker and Microphone
If debris gets in the speaker or microphone, use a soft bristle brush to
remove it. Do not insert any object into the speaker or microphone holes.
Stylus Slot
Rinse the stylus slot with water. Shake to remove the excess.
Display Bezel
If the edge under the bezel gets dirty, use a microfiber cloth to remove the
debris. Do not remove the bezel.