In-Situ RuggedReader Operators Manual for Blue RuggedReader User Manual
Page 52
Advertising
52
0055450 rev. 002 10/07
Rugged
Reader
Operator’s Manual
SECTION 6: IN-SITU SOFTWARE
Set the TROLL’s Clock
Select the TROLL in the tree and tap Edit, then Clock to synchronize
the device clock to the RuggedReader clock.
Calibrate Water Quality Sensors
A Select Parameters
B Tap QikCal
Read Parameters
single reading:
A Select any parameter
B Tap Read
Continuous readings (profiling):
A Select Parameters
B Tap Profiler
A
B
Make a selection
Tap an action
A
B
Advertising
This manual is related to the following products: