In-Situ RuggedReader Operators Manual for Blue RuggedReader - Manual (Page 59)

59
0055450 rev. 002 10/07 Rugged Reader Operator’s Manual
SECTION 6: IN-SITU SOFTWARE
The Software Manager utility displays the available and current
versions of software and the status of each.
4. Select the software to add to the RuggedReader and press Install.
The selected software will be installed on the RuggedReader.
Installing from a CAB File
You can install Win-Situ Mobile or Pocket-Situ 4 onto the RuggedReader
without an installation utility if you have the application’s install file on your
desktop/laptop computer as a “CAB” (a form of compressed application).
1. On the desktop: Connect in ActiveSync and drag the CAB into any
folder on the RuggedReader. (See the procedure Transferring Files To
& From the RuggedReader in Section 5.)
2. On the RuggedReader: Use File Explorer to navigate to the CAB file
and tap to run it. (See Exploring Files in Section 4.) This installs the
application.
The CAB file remains on the RuggedReader for re-installation of the
application, if needed.
TIP: If the
software
launches in
“demo” mode after re-
installation, you can
activate it with the License
Key and Activation Code
from the In-Situ License
Agreement shipped with
your RuggedReader. Or
contact In-Situ Technical
Support at 1-800-446-7488.