In-Situ RuggedReader Operators Manual for Blue RuggedReader - Manual (Page 69)

69
0055450 rev. 002 10/07 Rugged Reader Operator’s Manual
Problem
During calibration, the screen does not respond to stylus strokes or does
not complete the calibration process.
Solutions
Check to see if there is something stuck underneath the bezel. Use a
microfiber cloth to remove any excess debris. Also check to see if there
is damage or wear on any area of the touchscreen. In case of damage,
contact In-Situ Inc.
Problem
The RuggedReader runs slowly.
Solutions
It is possible that you have too many programs running. Try closing any
programs you are not using. To view and close running programs:
1. Tap on the Applications Manager icon .
2. Tap on the Running Programs tab in the Applications Manager
window.
3. Select a program and tap Stop. This closes the program.
SECTION 8: TROUBLESHOOTING