In-Situ RuggedReader Operators Manual for Blue RuggedReader - Manual (Page 30)

30
0055450 rev. 002 10/07 Rugged Reader Operator’s Manual
Calibrating the Touchscreen
If the touchscreen is not responding accurately to
stylus taps, try calibrating it manually:
1. Tap Start > Settings > System tab.
2. Scroll down and tap on the Screen icon.
3. In the Screen Settings window, select the Align
screen button.
4. Follow the directions on the display to calibrate
the touchscreen.
5. After you calibrate the touchscreen, the Screen
window appears again. Click OK to exit the
screen.
SECTION 3: USING THE HARDWARE