In-Situ RuggedReader Operators Manual for Blue RuggedReader - Manual (Page 49)

49
0055450 rev. 002 10/07 Rugged Reader Operator’s Manual
SECTION 6: IN-SITU SOFTWARE
Set up a Data Log
A Tap View menu > Logging to go to the Logging tab.
B At the Logging tap, tap the Expander button .
C In the Expander, tap the New button. The logging setup wizard starts.
Follow the steps in the wizard, tapping Next to continue in
each screen. For help on the prompts, see the Win-Situ Mobile Quick
Start included with your RuggedReader.
At the end of the Logging Setup Wizard, a summary of the log setup is
shown. Tap OK to write the log to the device.
= OK
= Next
= Expander
“Logging“
Expander
B
C
Logging tab