In-Situ RuggedReader Operators Manual for Blue RuggedReader - Manual (Page 55)

55
0055450 rev. 002 10/07 Rugged Reader Operator’s Manual
SECTION 6: IN-SITU SOFTWARE
3. Tap to put the cursor in the Site Name box.
4. Tap the keyboard symbol and enter a site
name.
Tap OK when finished.
5. Tap the Record button to log readings.
6. Output will be logged until you tap OK to
exit TDG Logger, or disconnect the probe.
Readings will be logged to a .txt file on the
RuggedReader (Built-In Storage \
TDGLogger) with the same name as the
site. For the example here, use the File
Explorer to navigate to My Device \ Built-
In Storage \ TDGLogger \ south dam.txt.
3
4
5
6