In-Situ RuggedReader Operators Manual for Blue RuggedReader - Manual (Page 46)

46
0055450 rev. 002 10/07 Rugged Reader Operator’s Manual
SECTION 6: IN-SITU SOFTWARE
Connect the Hardware
Connect the Level TROLL or Aqua TROLL to the RuggedReader’s 9-pin
serial port (see the RuggedReader Quick Start guide).
Launch the Software
Press the power button . Tap Start to display the Start menu.
Tap Programs > Win-Situ Mobile . The program launches and
displays the functional area called “My Data”
Connect to the Device
Tap the Connect button
When connected, focus shifts to the functional
area called “Home.” A real-time reading of each
supported parameter is displayed. Readings
update automatically while the Read button is
pressed.
The following page introduces the buttons and functions in the Win-Situ
Mobile Home screen.
TIP: If the
program
launches in
“demo” mode, you can
activate it with the license
key and activation code
from your In-Situ License
Agreement. Or contact
In-Situ Technical Support at
1-800-446-7488.
TIP: For
convenience in
launching Win-
Situ Mobile, you can assign
it to one of the keypad
buttons. See the
procedure
in Section 3.
“My Data”
= Device not connected
= Device connected
= Read button pressed
(default)
= Read button not pressed