Thermo Fisher Scientific CyberScan pH 5000 - Manual (Page 38)

Instruction Manual CyberScan pH5500/ 5000
This option allows you to identify the user of the meter. This
information can be saved in the meter’s memory. It can also be
printed out with measurement data on demand. The operator
identification can be up to 9 characters in length.
To Set Operator
1. Access the Set Operator screen from the System Setup screen.
The current operator identification is displayed on the screen.
2. Touch clear to remove the current operator identification.
3. Use the alphanumeric keys on the touch screen to enter the
desired operator identification. The BS button will allow you to
backspace to remove a character that was incorrectly entered.
The operator identification code can be a maximum of 9
characters in length.
4. Touch enter to accept the new operator identification.
OR
To deactivate the operator identification:
a) Touch
clear to erase the current user identification.
b) Touch enter to return to the System Setup screen.
OR
Touch exit to return to the System Setup screen.
OR
Touch exit to return to the System Setup screen, without making
any changes.
33