Thermo Fisher Scientific CyberScan pH 5000 - Manual (Page 66)

Instruction Manual CyberScan pH5500/ 5000
6.12 Set Print Interval
timed
enter
Set pH Print Interval
Current INTERVAL
1 2 3
4 5 6
7 8 9
BS 0 .
manual
You have three options for setting the print interval: manual printing,
stable reading printing, and timed interval printing.
For manual printing of data
In this mode, data is printed only when you touch print on the pH
(mV, Ion) Measure screen.
1. Access the Set Print Interval screen from the pH (mV, Ion) Setup
screen. The current print interval is displayed on the screen.
2. Touch MAN to set the meter for manual printing.
3. Touch enter to accept the print interval mode and return to the
pH (mV, Ion) Setup screen.
Printing is now done manually by touching print on the Measure
screen.
OR
Touch exit to return to the pH (mV, Ion) setup screen, without
making any changes.
61