Thermo Fisher Scientific CyberScan pH 5000 - Manual (Page 34)

Instruction Manual CyberScan pH5500/ 5000
5.9 Set Number of Bits
To Set Number of Bits
1. Access the Set number of Bits screen from the Set Print
Configuration screen. The current number of bits is displayed on
the screen.
2. Touch 7 or 8 to select the number of bits.
3. Touch enter to accept the bit value and return to the Set print
Configuration screen.
OR
Touch exit to return to the Set Point Configuration screen,
without making any changes.
enter
Current NUMBER OF BITS
Set Number of Bits
7
8
29