Thermo Fisher Scientific CyberScan pH 5000 - Manual (Page 82)

Instruction Manual CyberScan pH5500/ 5000
To Set Print Interval
You have three options for setting the print interval: manual printing,
stable reading printing and timed interval printing.
The mV Print Interval is set the same way as previously described in
pH setup. See page 61 for instructions.
To Set Data Storage Criteria
This screen allows you to select what criteria are stored in the meter’s
memory with the measurement when you save the data. The status
of the current data storage criteria is displayed on the screen. The
criteria option Is active if “ON” appears on the right of the screen. It is
inactive is “OFF” appears to the right of the screen. All storage criteria
will stored in the meter’s memory with the measurement. However,
only active items will appear on the View Stored Data screens.
Changing the status of the storage criteria to active from inactive will
allow the criteria to be displayed with the previously stored data.
The mV Data Storage Criteria are set the same way as previously
described in pH Setup. See page 63 for instructions.
To Set Display Configuration
This function will allow you to choose what information you would like
to be displayed on the mV Measure screen, particularly the
information contained in the data box at the bottom of that screen.
The mV display configuration is set the same way as previously
described in pH Setup. See page 67 for instructions.
To View Stored Data
This meter has memory capacity for up to 250 data points. The View
Stored Data screen allows sorting and looking, at specific data points.
The stored data can be sorted by sample identification number, date
or operator identification number.
The mV stored data is viewed the same way as previously described
in pH setup. See page 69 for instructions.
77