Thermo Fisher Scientific CyberScan pH 5000 User Manual
Page 47
Instruction Manual
CyberScan pH5500/ 5000
When this option is active, each time you touch print on the
Measure screen the pH value along with the date/ time/ channel
and the sample ID# will be sent to data storage. (See Data
Storage Criteria page 68 for additional information on saved
parameters). You can manually enter an alphanumeric
identification number of up to 9 characters for any sample or you
can have the meter sequentially number your samples beginning
at the number of your choice. You may choose to deactivate the
sample ID#.
To Set Sample ID#
Manual ID# Assignment
1. Access the Set Sample ID# screen from the pH (mV, Ion)
Setup screen.
2. Touch man for manual ID# entry. The current ID# is
displayed on the screen.
3. Touch
clear to delete the current ID#.
4. Use the alphanumeric keypad on the screen to meter the
desired Sample ID#. The BS Key will allow you to backspace
to remove a character that was incorrectly entered.
5. Touch
enter to accept the current ID# and return to the pH
(mV, Ion) Setup screen.
42