Thermo Fisher Scientific CyberScan pH 5000 User Manual
Page 88
Instruction Manual
CyberScan pH5500/ 5000
8.2 Select Ion Method
To Set Sample ID#
When this option is active, each time you touch print on the Measure
screen the ion concentration value along with date/ time/ channel and
the sample ID# will be sent to data storage. You can manually enter
an alphanumeric identification number of up to 10 characters for any
sample or you can have the meter sequentially number your samples
beginning at the number of your choice. You may also choose to
deactivate the sample ID#.
The ion sample ID# is set the same way as previously described in
pH Setup. See page 41 for instructions.
To Select Ion Method
1. Use
the
arrow keys to highlight the method you want to use.
2. Touch enter to accept the method and return to the Setup
screen.
OR
Touch
exit to return to the Ion setup screen, without making any
changes.
Direct Reading with Standards
Known Addition
Known Subtraction
Analate Addition
Analate Subtraction
Direct Read with Blank offset
enter
Current METHOD
Select Ion Method
S
T
Blank
83